Project Associate - Mechanical
qosmic- Posted 26 minutes ago
- Be among the first 10 applicants
Job Description
Type: Full Time (Contract based position between 6 to 12 months)
Location: Bangalore
Compensation (CTC): Determined by candidate's qualifications and relevant experience
Joining Date: Immediate
About the Role
We're building the optical highway to the cosmos
Join us as a Mechanical Project Associate to work on our Fast Steering Mirror (FSM). You will take
each design end to end, from compliant-mechanism theory through CAD and finite element analysis
(FEA) to machined and measured hardware, working closely with our controls, optics and
manufacturing teams. We value candidates with directly relevant experience, and we let the bench
decide over the model.
Responsibilities
• Design FSM flexure mechanisms: select the architecture, size the hinges, and set the firstmode
target against the control bandwidth with the controls team.
• Derive stiffness, compliance, stress and natural frequency from first principles, and check
every ANSYS Workbench FEA result against a hand calculation.
• Create parametric SolidWorks models and fully toleranced drawings (geometric dimensioning
and tolerancing, GD&T) under version control.
• Integrate piezo stack and voice-coil actuators: preload, stiffness matching, hysteresis and
creep.
• Plan and run stiffness, deflection and modal tests, and compare measured against predicted
response.
• Work with machinists and vendors on process selection, fixtures and inspection.
• Provide the controls team with mechanical data (mode shapes, frequency response, stiffness,
damping, cross-coupling) with its uncertainty.
• Write design reports in which assumptions are stated and every number is traceable to a
calculation, simulation or measurement.
Requirements
• B.Tech/ M.Tech/ PhD in Mechanical, Mechatronics, Aerospace, Precision Engineering or
Applied Mechanics.
• 1–3 years of hands-on experience in designing, manufacturing or testing precision mechanical
systems. Candidates with strong academic research and demonstrable prototype development
experience are encouraged to apply.
• Advanced SolidWorks, and GD&T with design for manufacturing.
• ANSYS Workbench: static, modal, harmonic and random vibration analysis, with mesh
convergence checks.
• Precision machining knowledge (milling, turning, grinding, wire electrical discharge machining,
EDM): achievable tolerances, fixturing, and distortion from residual stress and thermal growth.
• Strong mechanics and mathematics: beam theory, energy and matrix methods, differential
equations.
• Materials and thermal design: flexure material selection, fatigue (cyclic stress below the
endurance limit), coefficient of thermal expansion (CTE) mismatch, and tolerance stack-up.
• Precision metrology (coordinate measuring machine, interferometry, autocollimators, capacitive
probes) and pseudo-rigid-body models.
Nice-to-Have Experience
• Fast steering mirrors, piezo and voice-coil actuators, or flexure-pivot stages
• Topology optimisation and nonlinear FEA
• Kinematic and optical mount design
• Prototype or production machine shop experience
• Space or defence programmes (European Cooperation for Space Standardization, ECSS, or
similar)
What We Offer
• The opportunity to design fine-pointing mechanisms for next-generation space optical
communication from scratch
• A collaborative, multi-disciplinary research environment
How to Apply
Send your resume and a brief note about your interests to: [Confidential Information].
