Design Engineer - III

Design Engineer – III will be responsible for electrical design, Feasibility Study, Detail Engineering, and coordination of medium-voltage (MV) and high-voltage air/Gas insulated substation projects including Modifications/Upgradation of existing substation in the 34.5kV – 550kV range.

You will collect data and gather information from different disciplines and analyse to supports the design. Also be responsible for the coordination and interface with other disciplines working with same projects such as civil, protection and control, Physical, Automation Design, Utility standards, Vendors, Procurement, Environmental, according to NERC requirements.

Designer Engineer-III will perform standard electrical Design and perform basic design tasks applying standard techniques and procedures.

Your position is key role in substation Design team performance, which serves utility customers who has goal to deliver the power efficiently and reliably, maintain power quality, control and manage electrical networks.

You will assist Project Engineer/Project Manager in review­ing the Design generated documentation to ensure that it is in general compliance with the applicable project guidelines, cus­tomer specifications, governing national standards and sound Design judgment before it is subjected to the internal approval proc­ess.

As needed you will Interact and communicate effectively with project managers, other design disciplines, and other team members to report project status and address project-related issues.

Quality processes and document control procedures to ensure design documents/deliverables are complete and accurate. Notify the project lead of any difficulties encountered in the design that may impact safety, reliability, quality, cost, or schedule of the PHAZYS project deliverables and provide recommendations for solutions.

You will make sure to read, analyse, and interpret design codes and regulations and apply them to the project design guidelines/ documents. Implement design based on requirement and recommendations per National Electrical Safety Code (NESC), National Electric Code (NEC), Institute for Electrical and Electronics Designers (IEEE), American National Standard Institute (ANSI), and Design Guide for Rural Substations.

Review the work of other designers for completeness and accuracy and make sure designs are performed in accordance with current standard codes, regulations, and scope of work requirement.

Lead project team to provide deliverables in areas including, but not limited to:

• Substation/Switchyard General Arrangements & Layout
• Substation Elevation and Equipment Views
• Design & Drafting of Single Line Diagrams (SLD's)
• Preparation of Power Plans
• Substation Grounding Layouts and Details
• Equipment selections and reviewing vendor drawings/ specifications.
• Equipment documentation reviews
• Auxiliary power (AC and DC) Design
• Cable Trench, Conduit and Tray Layout & Design
• Motor Control Centre (MCC) Panel Layouts
• Bill of Materials (BOM) and Panel Schedules
• Lightning protection analysis and design
• Illumination design
• Prepare new or modify existing relay drawings including relay panel arrangements, single lines, three lines, AC & DC schematics, equipment, and relay panel wiring.
• Review existing drawings/conditions and incorporate changes as per customer requirements/standards.
• Coordination with substation structures, transmission tower/Dead ends and equipment including line hardware, connectors, insulators, switches, and all types of conductors.
• Coordination with foundations, Grading Plan, Fence layout.
  
  

Preferred Candidate –

• 4-year accredited Electrical Engineering/Technology degree.
• Minimum 4-to-6-year work experience electrical substation design
• which includes physical, protection and control of MV, HV and EHV substation projects.
• Knowledge of International Standards such as IEEE, IEC, NEMA, NEC, CSA, etc.
• Good communication skills, presentation skills & learning attitude.
• Should have capabilities to work independent and develop the drawings, deliverable packages by using 2D or 3D AutoCAD software.
  
  

Perks and Benefits –

• Performance Bonus
• Flexible Schedule
• The ESIC Facility will be provided to the relevant employees.
  
  

Key Skills –

• Substation Design, Transmission, Relay engineer, Design Engineer, Earthing Calculation, High Voltage, etc.
  
  

Requirements

Educational Qualification – (Electrical Only)

• B.E Electrical / B.Tech
• ME Electrical / M.Tech
• Diploma in Electrical Engineering
  
  

Benefits

Perks and Benefits -

• Performance Bonus
• Flexible Schedule
• PF & ESIS Facility will be provided to the relevant employees.