Job Title
Civil Engineer Construction (Civil & Structural, Green Building, Water Treatment)
Location
Project Site Hyderabad Ranga Reddy Dist.
Reports to: Construction Manager / Project Manager
Department: Engineering / Projects
Req ID: R-1174295
Role Purpose
Deliver end-to-end site execution for civil and structural works, ensure green building compliance, and support water/wastewater treatment infrastructure constructionmeeting safety, quality, cost, and schedule targets.
Key Responsibilities
- Civil & Structural (C&S) Execution
- Supervise execution of earthworks, foundations, PCC/RCC/structural steel, masonry, flooring, waterproofing, paving, and drains as per approved drawings and method statements.
- Review IFC drawings, manage RFIs, deviations, and redlines; coordinate with design/PMC for constructability and field changes.
- Ensure compliance with applicable codes (e.g., IS codes, NBC 2016, factory building standards) and client specifications.
- Conduct bar bending schedule (BBS) checks, rebar inspections, shuttering/formwork checks, concrete pour approvals, slump and cube tests.
- Complete Ground level planning in PEB errections schedules and Monitor the quality of executions .
- Monitor structural steel fabrication/erection (fit-up, welding, bolting, NDT, alignment).
- Interface planning with MEP/utilities to avoid clashes; coordinate underground services and civil inserts/sleeves.
- Lead daily toolbox meetings; plan manpower, machinery, and material requirements.
- Green Building (Sustainability)
- Implement sustainability goals (IGBC/LEED/GRIHA targets): site waste management, material submittals (recycled content, low-VOC), erosion/sedimentation control, heat island mitigation, and water/energy efficiency measures.
- Maintain documentation for credits: delivery challans, product certificates, environmental declarations, and commissioning logs.
- Support envelope performance, daylighting, and indoor air quality compliance during construction.
- Coordinate third-party commissioning (Cx), blower door/airtightness tests (if applicable), and OPR/BOD alignment.
- Water & Wastewater Treatment (WTP/WWTP/ETP/STP)
- Execute civil works for intake structures, equalization tanks, clarifiers, aeration basins, MBR/SBR/ASP units, filter houses, chemical rooms, sludge handling, and associated pipe galleries/channels.
- Coordinate with process/mechanical vendors on equipment foundation levels, anchor bolts, grout pockets, embed plates, and trench layouts.
- Ensure waterproofing, crack control, leak testing (hydrostatic), joint treatment, and chemical resistance specifications.
- Support process commissioning readiness: gravity flow levels, weirs, scum baffles, penstocks, and access/maintenance clearances.
- Integrate rainwater harvesting/zero liquid discharge (ZLD) or reuse systems where applicable.
- HSE & Quality Assurance/Quality Control
- Enforce site HSE: PTW, WAH, LOTO, scaffolding, excavation shoring, confined space, lifting plans, and housekeeping.
- Prepare ITPs/QAPs; ensure inspection hold points and third-party/NABL testing.
- NCR/CAR management; root cause analysis and corrective/preventive actions.
- Maintain safety/quality KPIs and incident reporting.
- Planning, Contracts & Commercial
- Provide inputs to project schedule (WBS), daily/weekly progress tracking, micro-planning, and look-aheads.
- Joint measurements, DPR/MPR, reconciliation (cement, steel, concrete), and productivity tracking.
- Support subcontractor management, rate analysis, RA bills, change orders/claims, and BOQ verifications.
- Stakeholder & Statutory Coordination
- Coordinate with client/PMC, consultants, vendors, utility agencies, local authorities, and auditors.
- Assist in compliance with construction permits, environmental approvals, and factory/local body norms.
- Attend progress/coordination meetings; present site status and risk/mitigation plans.
- Documentation & Billing schedule
- Maintain site logs, test records, pour cards, inspection reports, method statements, and as-built drawings.
- Use BIM/3D models (if available) for clash detection/quantities; leverage digital tools for snagging, RFIs, and progress tracking.
- Timely Verification of the site Billings to have right cash flow and maintaining all the data of the GRN and Billing Data .
Qualifications & Experience
- Education: B.E./B.Tech in Civil Engineering .
- Experience: 510 years (adjust range as needed) in industrial/commercial construction with at least one project involving water/wastewater treatment and one green buildingcertified or targeted project (IGBC/LEED/GRIHA).
- Codes/Standards: Working knowledge of IS codes, NBC 2016, IS 456, IS 800, IS 875, IS 3370 (liquid retaining), welding/NDT basics, relevant environmental and wastewater guidelines.
- Tools: AutoCAD, MS Project/Primavera, MS Excel, BIM (Navisworks/Revit preferred), QA/QC digital tools, surveying (Total Station) basics.
Skills & Competencies
- Strong site execution leadership and contractor management.
- Reading/interpreting drawings, BBS, and shop drawings.
- Concrete technology, waterproofing systems, and structural steel erection know-how.
- Understanding of wastewater process layouts, levels, watertight structures, and corrosion protection.
- Sustainability mindset; ability to maintain credit documentation and enforce low-VOC, waste segregation, and energy-water efficiency measures.
- HSE-first behavior; incident prevention and risk assessment.
- Commercial awareness: measurements, reconciliation, and change control.
- Clear communication, stakeholder handling, and problem-solving.
Certifications (Preferred)
- First Aid/Fire Safety; Scaffolding Inspector (desired).
- Concrete/steel QA certifications (e.g., NDT Level II for relevant personnel is a plus).
Key Performance Indicators (KPIs)
- Schedule: % activities completed on time; variance from baseline.
- Quality: First-pass yield; # of NCRs per month; closure lead time.
- Safety: TRIR/LTIFR; # of SHE observations and closeouts.
- Cost: Material reconciliation accuracy; change order control; productivity indices.
- Sustainability: Credits achieved vs. planned; waste diversion rate; water/energy efficiency milestones.
- Commissioning Readiness: Punch list closure; hydrotests/leak tests pass rate for tanks/channels.
Working Conditions
- Site-based role; extended hours/weekend work as per project needs.
- Physical requirements: frequent walking, climbing, and inspections in outdoor/industrial environments.
- PPE compliance at all times.
